We're sorry, but we couldn't find any products matching ""
Return to Category Search
The Altronix ALTV1224C AC/DC Dual Output Power Supply is designed to provide both 12VDC and 24VAC outputs where a combination of both AC and DC outputs are required. It will provide eight (8) 3.5 amps 12VDC outputs and eight (8) 3.5 amps 24 VAC outputs. FEATURES: 115 VAC 50 / 60 HZ, 1.45 amps. 7 amps total continuous output current. 3.5 amps continuous supply current at 24VAC output. 3.5 amps continuous supply current at 12VDC. l16 individually fused outputs. (8 outputs @ 12VDC and 8 outputs@ 24VAC). Main fuses are rated at 5 amps / 250VAC. AC /DC power LED indicator. Surge protection. Spare fuses included. Unit maintains camera synchronization. Power ON/OFF switch. Ease of installation saves time and eliminates costly labor. Enclosure dimensions: 15.5''H x 12''W x 4.5''D PDF Spec Sheet Read More
SECURITY TRANSFORMER 24VAC 100VA Altronix Transformers, Voltage: 24 V, Power: 100 VA, Includes: AC line cord and secondary leads, For Use with: SMP series power supplies Read More
Operate your 12 Volt DC in a 24 Volt AC system Accepts 20 to 28 Volts AC and 15 to 30 Volts DC and converts it to 12 Volts DC Voltage input via 2-pin terminal block, Manufacturer: Speco Technologies Read More
CCTV AC Wall Mount Power Supply- Four (4) PTC Outputs, 24VAC @ 4 Amp or 28VAC @ 3.5 Amp, Grey enclosure 8.5"H x 7.5"W x 3.5"D Read More
Description: The AL624 Linear Power Supply/Charger converts low voltage AC input into 6VDC or 12VDC @ 1.2 amp or 24VDC @ 750 mA of continuous supply current. This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power. Specifications: Selectable 6-12-24VDC power limited output. 1.2 amp continuous supply current at 6-12VDC. 750mA continuous supply current at 24VDC. Filtered and electronically regulated output. Built-in charger for sealed lead acid or gel type batteries. Maximum charge current 300mA. Automatic switchover to stand-by battery when AC Fails. AC input and DC output LED indicators. Thermal and short circuit protection with auto reset. Fused battery protection (circuit breakers available). Snap Trac compatible (order Altronix model #ST3). DIN Rail mount version available (order Altronix model #DPS1). Includes battery leads. Extremely compact design. Board dimensions: 3"L x 2.5"W x 1.5 Read More
Overview DPS5 power supply/charger converts low voltage AC input into 6VDC, 12VDC or 24VDC @ 4 amps of continuous supply current (see specifications). This general purpose power supply has a wide range of applications for access control, security and CCTV system accessories that require additional power. Specifications: Switch selectable 6VDC-12VDC-24VDC. 4 amps continuous supply current at 6VDC-12VDC-24VDC*. Filtered and electronically regulated output. Built-in charger for sealed lead acid or gel type batteries. Maximum charge current 300mA. Automatic switch over to stand-by battery. Battery short circuit protection (circuit breaker). Thermal overload and short circuit protection. AC input and DC output LED indicators. Extremely compact design. Includes battery leads and Snap Trac (Altronix model #ST3). Board Dimensions: 3.5"L x 2.75"W x 1.75"H * Specified at 25 C ambient. Read More
12 volt (13.8V) 4 amp regulated/filtered power supply, 5 amp surge, cigarette lighter adapter built-in front panel, regulated and filtered output, fuse and auto reset sircuit breaker overload protection, heavy duty grounded 3 prong AC power cord, universal binding posts Read More
Clover IR010 Night Light Weather Resitant 30 Foot Range, Low Power Consumption, 30 Illuminators LED count & rating (IR 010, I R010, IR-010, I-R010 010) Clover IR010 Night Light Weather Resitant 30 Foot Range, Low Power Consumption, 30 Illuminators LED count & rating, User Friendly, Easy To Connect, Low Power Consumption. Description Clover Electronics' Night Lights are indeed the night vision accessory of choice for any owner of a black and white video camera.Turn any black and white camera into a night vision camera with the IR010. Set up couldn't be any easier. Just "Plug and POINT". Plug in the power supply, point the lamp at your desired area of target, then let your camera do the rest. Features User Friendly Easy To Connect Up To 30 Foot Range Low Power Consumption Weather Resistant Specification Construction Metal Casing Night Vision 30' Range Usable Illumination 0.0 Lux LED count & rating 30 Illuminators (830nM) Power Supply DC 12V 300mA Dimensions 45mm() x 20mm(H) A-200412 Read More
The Altronix Rack Mount CCTV Power Supply provides 24VAC or 28VAC distributed via thirty-two (32) fuse protected outputs for powering CCTV Cameras, heaters and other video accessories.FEATURES:24VAC or 28VAC selectable output.12.5 amp @ 24VAC (300VA) or 10 amp @ 28VAC (280VA) supply current.Thirty two (32) fuse protected outputs.Output fuses are rated @ 3.5 amp.115VAC 50/60Hz, 3 amp input.Surge suppression.AC power LED indicator.Power ON/OFF switch.Unit maintains camera synchronization.Removable terminal blocks w/locking screw flange. Read More
Eight (8) Fused Outputs, 24VAC @ 12.5 Amp or 28VAC @ 10 Amp. cULus Listed. Enclosure 13"H x 13.5"W x 3.25"DFEATURES:24VAC or 28 VAC selectable output.12.5 amp @ 24VAC or 10 amp @ 28VAC (280VA) supply current.Eight (8) fuse protected outputs.Fuses are rated @ 3.5 amp.115VAC 50/60Hz, 2.7 amp input.Surge suppression.AC power LED indicator.Power ON/OFF switchUnit maintains camera synchronization Read More
Allows 4 fused outputs with total capacity of 2Amp. No master power switch. UL Listed. 120 VAC input, 24 VAC output. Read More
Switching Power Supply / Charger- 24VDC @ 10 Amp. With grey enclosure 15.5ÂH x 12ÂW x 4.5ÂD, cam lock and transformer Read More
The Altronix ALTV2432-350 CCTV Power Supply is designed with 32 individually fused outputs for powering CCTV Cameras and other video accessories. It will provide 24VAC distributed via 32 fuse output with a total of 14.5 amps continous supply current.Specifications: Input 115VAC/60Hz, 1.8 amp. 32 individually fused outputs. Output fuses are rated at 3.5 amps / 250VAC (Fig. 1). Main fuses are rated at 5 amp / 250VAC (Fig. 1). 24 VAC output. 14.5 amps (350 VA) supply current. AC power LED indicator. Surge protection. Unit maintains camera synchronization. Power ON/OFF switch. Ease of installation saves time and eliminates costly labor. Unit is supplied assembled in enclosure. Spare fuses included.Enclosure dimensions: 15.5"H x 12.5"W x 5"DModels available with UL Listing (commercial CCTV equipment UL2044) (7 AMP)Spec Sheet in PDF format Read More
OverviewALTV244175UL CCTV power supply is designed to power CCTV Cameras and accessories. It will provide 24VAC @ 7.25 amp or 28VAC @ 6.25 amp distributed via four (4) fuse protected outputs. UL listedSpecifications:Input 115VAC 50/60 Hz, 1.5 amp.24 VAC @ 7.25 amp (175VA) or 28VAC @ 6.25 amp C total supply current.Four (4) individual fused outputs. output current.Surge suppression.Output fuses are rated at 3.5 amp / 250VAC.Main fuse is rated at 10 amp / 250VACAC power LED indicator.Power ON/OFF switch.Spare fuses included.Unit maintains camera synchronization.Ease of installation saves time and eliminatescostly labor.Enclosure dimensions: 8.5"H x 7.5"W x 3.5"D Also available in UL Listed NEMA 4 Weatherproof Cabinet.Spec Sheet in PDF format Read More
The AL1012ULXPD16 power supply converts a 115VAC/60Hz input, into 10 amp of continuous supply current @ 12VDC distributed via sixteen (16) fuse protected outputs Read More
The Altronix R2416UL CCTV Power Supply is designed with sixteen (16) individual fused outputs for powering CCTV Cameras and other video accessories. It will provide 24VAC distributed via sixteen (16) fused outputs with a total of 7 amp continuous supply current.FEATURES:24VAC output.7 amp (175VA) supply current.Sixteen (16) fuse protected outputs.Output fuses are rated @ 3.5 amp.115VAC 50/60Hz, 3 amp input.Surge suppression.AC power LED indicator.Power ON/OFF switch.Unit maintains camera synchronization.Removable terminal blocks w/locking screw flange. Read More
Model SMP3WP power supply converts a 115VAC 50/60Hz, 1.45 amp input, to a 12VDC or 24VDC @ 6 amp of continuous supply current output.FEATURES:12VDC or 24VDC selectable output6 amp of continuous supply current output.115VAC 50/60Hz, 1.45 amp input.AC input and DC output LED indicators. Read More
Overview:The Altronix ALTV244-300 CCTV Power Supply is designed with four (4) individually fused outputs for powering CCTV Cameras,environmental housings and other video accessories. It will provide 24VAC distributed via four (4) fused outputs with a total of 12.5amps continuous supply current.Specifications: Input 115VAC 50/60 Hz, 2.7 amps. Four (4) 24VAC individual fused outputs. 12.5 amps (300VA) supply current. Output fuses are rated at 3.5 amps / 250VAC (Fig. 1). Surge protection. AC power LED indicator. Power ON/OFF switch. Spare fuse included. Unit maintains camera synchronization. Ease of installation saves time and eliminates costly labor.Enclosure dimensions: 12.25"H x 7.25"W x 4.5"DOptional available with 220VAC input order model # ALTV244-300/220. Read More
Off Line Switching Power Supply / Charger- 12VDC or 24VDC @ 6 Amp with integral transformer. Monitors AC fail and Battery trouble Board Read More
The Altronix Rack Mount CCTV Power Supply provides 24VAC or 28VAC distributed via thirty-two (32) fuse protected outputs for powering CCTV Cameras, heaters and other video r2432600ul accessories.FEATURES:24VAC or 28VAC selectable output.25 amp @ 24VAC (600VA) or 20 amp @ 28VAC (560VA) supply current.Thirty two (32) fuse protected outputs.Output fuses are rated @ 3.5 amp.115VAC 50/60Hz, 6 amp input.Surge suppression.AC power LED indicator.Power ON/OFF switch.Unit maintains camera synchronization.Removable terminal blocks w/locking screw flange. Read More
The Altronix ALTV2416300UL CCTV Power Supply is designed with sixteen (16) individual fuse protected outputs for powering CCTV Cameras and other video accessories. It will provide 24VAC or 28VAC distributed via sixteen (16) fuse protected output.FEATURES:24VAC or 28VAC selectable output.12.5 amp @ 24VAC (300VA) or 10 amp @ 28VAC (280VA) supply current.Sixteen (16) fuse protected outputs.Output fuses are rated @ 3.5 amp.115VAC 50/60Hz, 2.7 amp input.Surge suppression.AC/DC power LED indicator.Power ON/OFF switch.Unit maintains camera synchronization. Read More
